Do you know what the maintenance requirements and usage meth

We should know that diamond saw blades are a kind of cutting tool, widely used in the processing of hard and brittle materials such as concrete, refractory materials, stone, and ceramics. Then, do you know the maintenance methods and usage requirements of diamond saw blades? Today, let's take a look together!

Maintenance methods for diamond saw blades:

When the diamond saw blade is no longer sharp and the cutting surface is rough, it should be reground in time. Grinding cannot change the original Angle and disrupt the dynamic balance.

2. The inner diameter correction and positioning hole processing of the diamond saw blade shall be carried out by the manufacturer. If the processing is poor, it will affect the product's usage effect and may cause danger. In principle, the reaming should not exceed the original hole diameter by more than 20mm to avoid affecting the stress balance.

3. If the diamond saw blade is not used immediately, it should be placed flat or hung up through the inner hole. No other items or steps should be placed on the flat diamond saw blade, and it is necessary to pay attention to moisture-proofing and rust-proofing.

Diamond saw blade

The usage requirements of diamond saw blades:

When dry cutting, please do not cut continuously for a long time to avoid affecting the service life and cutting effect of the diamond saw blade. When cutting wet discs, water should be added for cutting to prevent electric leakage.

2. Ensure that the chip removal trough and the slag suction device of the equipment are unobstructed to prevent the accumulation of slag into lumps, which may affect production and safety.

3. If cutting aluminum alloy or other metals, special cooling and lubricating fluid should be used to prevent the saw blade from overheating, causing tooth burning and other damages, which may affect the cutting quality.

4. When starting and stopping the cutting of the diamond saw blade, do not feed the tool too fast to avoid tooth breakage and damage.

5. During operation, if abnormal sounds or vibrations are detected, the cutting surface becomes rough, or an unpleasant smell is produced, the operation should be immediately halted. Timely inspection and troubleshooting should be carried out to prevent accidents.

6. During operation, the workpiece should be ensured to be fixed, and the profile positioning should be in line with the cutting direction to avoid abnormal entry. Do not apply side pressure or curve cutting. The feed should be smooth to prevent the cutting edge from making impact contact with the workpiece, which may cause the saw blade to break or the workpiece to fly out, resulting in an accident.

The above is the content about diamond saw blades that we have introduced to you. Hangzhou Boye Precision Tools Co., Ltd. is a Sino-Japanese joint venture, specializing in the development, design, production, sales and service of precision cutting tools. At the same time, it provides technical consultation on diamond tools, hard alloy circular saw blades and material processing for domestic and foreign customers. If you want to know more, you are welcome to call us for consultation!